Journal Articles
Brunner D., Prasad A.K., Advani S.G., and Peticolas B.W., "A robust cell voltage monitoring system for analysis and diagnosis of fuel cell or battery systems," Journal of Power Sources, Vol. 195, pp. 8006-8012, December 15, 2010. doi:10.1016/j.jpowsour.2010.06.054
Bubna P., Brunner D., Advani S.G., and Prasad A.K., "Prediction-based optimal power management in a fuel cell/battery plug-in hybrid vehicle," Journal of Power Sources, Vol. 195, pp. 6699-6708, October 1, 2010. doi:10.1016/j.jpowsour.2010.04.008
Arisetty S., Krewer U., Advani S.G., and Prasad A.K., "Coupling of kinetic and mass transfer processes in direct-methanol fuel cells," Journal of the Electrochemical Society, Vol. 157, pp. B1443-B1455, August 17, 2010. doi:10.1149/1.3478142
Bubna P., Brunner D., Gangloff J.J. Jr., Advani S.G., and Prasad A.K., "Analysis, operation, and maintenance of a fuel cell/battery series-hybrid bus for urban transit applications," Journal of Power Sources, Vol. 195, pp. 3939-3949, June 15, 2010. doi:10.1016/j.jpowsour.2009.12.080
Spernjak D., Prasad A.K., and Advani S.G., "In situ comparison of water content and dynamics in parallel, single-serpentine, and interdigitated flow fields of polymer electrolyte membrane fuel cells," Journal of Power Sources, Vol. 195, pp. 3553-3568, June 1, 2010. doi:10.1016/j.jpowsour.2009.12.031
Zhang F.Y., Advani S.G., Prasad A.K., Boggs M.E., Sullivan S.P., and Beebe Jr. T.P., "Quantitative characterization of catalyst layer degradation in PEM fuel cells by X-ray photoelectron spectroscopy," Electrochimica Acta, Vol. 54, pp. 4025-4030, June 30, 2009. doi:10.1016/j.electacta.2009.02.028
Krishnan P., Advani S.G., and Prasad A.K., "Thin-film CoB catalyst templates for the hydrolysis of NaBH4 solution for hydrogen generation," Applied Catalysis B: Environmental, Vol. 86, pp. 137-144, February 23, 2009. doi:10.1016/j.apcatb.2008.08.005
Arisetty S., Jacob C.A., Prasad A.K., and Advani S.G., "Regulating methanol feed concentrations in direct methanol fuel cells using feedback from voltage measurements," Journal of Power Sources, Vol. 187, pp. 415-421, February 15, 2009. doi:10.1016/j.jpowsour.2008.11.129
Spernjak D., Advani S.G., and Prasad A.K., "Simultaneous neutron and optical imaging in PEM fuel cells," Journal of the Electrochemical Society, Vol. 156, pp. B109-B117, November 10, 2008. doi:10.1149/1.3009585
Krishnan P., Advani S.G., and Prasad A.K., "Cobalt oxides as Co2B catalyst precursors for the hydrolysis of sodium borohydride solutions to generate hydrogen for PEM fuel cells," International Journal of Hydrogen Energy, Vol. 33, pp. 7095-7102, November 12, 2008. doi:10.1016/j.ijhydene.2008.09.026
Weigert E.C., Arisetty S., Advani S.G., Prasad A.K., and Chen J.G., "Electrochemical evaluation of tungsten monocarbide (WC) and platinum-modified WC as alternative DMFC electrocatalysts," Journal of New Materials for Electrochemical Systems, Vol. 11, pp. 243-251, October 2008.
Brown D., Alexander M., Brunner D., Advani S.G., and Prasad A.K., "Drive-train simulator for a fuel cell hybrid vehicle," Journal of Power Sources, Vol. 183, pp. 275-281, August 15, 2008. doi:10.1016/j.jpowsour.2008.04.089
Arisetty S., Advani S.G., and Prasad A.K., "Methanol diffusion rates through the anode diffusion layer in direct methanol fuel cells from limiting current measurements," Heat and Mass Transfer/Waerme- und Stoffuebertragung, Vol. 44, pp.1199-1206, August 2008. doi:10.1007/s00231-007-0355-3
Krishnan P., Yang T.H., Advani S.G., and Prasad A.K., "Rotating ring-disc electrode (RRDE) investigation of borohydride electro-oxidation," Journal of Power Sources, Vol. 182, pp. 106-111, July 15, 2008. doi:10.1016/j.jpowsour.2008.03.064
Zhang F.Y., Advani S.G., and Prasad A.K., "Performance of a metallic gas diffusion layer for PEM fuel cells," Journal of Power Sources, Vol. 176, pp. 293-298, January 21, 2008. doi:10.1016/j.jpowsour.2007.10.055
Zhang F.Y., Spernjak D., Prasad A.K., and Advani S.G., "In situ characterization of the catalyst layer in a polymer electrolyte membrane fuel cell," Journal of the Electrochemical Society, Vol. 154, pp. B1152-B1157, September 12, 2007. doi:10.1149/1.2777987
Spernjak D., Prasad A.K., and Advani S.G., "Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell," Journal of Power Sources, Vol. 170, pp. 334-344, August 2007. doi:10.1016/j.jpowsour.2007.04.020
Feser J.P., Prasad A.K., and Advani S.G., "Particle image velocimetry measurements in a model proton exchange membrane fuel cell," Journal of Fuel Cell Science and Technology, Vol. 4, pp. 328-335, July 10, 2007. doi:10.1115/1.2744053
Arisetty S., Prasad A.K., and Advani S.G., "Metal foams as flow field and gas diffusion layer in direct methanol fuel cells," Journal of Power Sources, Vol. 165, pp. 49-57, February 25, 2007. doi:10.1016/j.jpowsour.2006.12.008
Feser J.P., Prasad A.K., and Advani S.G., "Experimental characterization of in-plane permeability of gas diffusion layers," Journal of Power Sources, Vol. 162, pp. 1226-1231, November 22, 2006. doi:10.1016/j.jpowsour.2006.07.058
Zhang F.Y., Prasad A.K., and Advani S.G., "Investigation of a copper etching technique to fabricate metallic gas diffusion media," Journal of Micromechanics and Microengineering, Vol. 16, pp. N23-N27, November 1, 2006. doi:10.1088/0960-1317/16/11/N02
Feser J.P., Prasad A.K., and Advani S.G., "On the relative influence of convection in serpentine flow fields of PEM fuel cells," Journal of Power Sources, Vol. 161, pp. 404-412, October 20, 2006. doi:10.1016/j.jpowsour.2006.04.129