University of Delaware
Department of Mechanical Engineering
About ME
People
Research
Academics
Admissions
Resources
Alumni
News & Events
UD Home
College Home
Map & Directions
webmail
126 Spencer Lab, U. of D., Newark, DE 19716-3140 ph: 302-831-3140 fax: 302-831-3619
 
 
 
 
 
 
 
 
 
Dr. Suresh G. Advani

George W. Laird Professor of Mechanical Engineering
Department of Mechanical Engineering
University of Delaware
126 Spencer Lab.
Newark, DE 19716
E-mail: advani@udel.edu

Dr. Advani's personal homepage

 

 

DEGREES
Ph.D. in Mechanical Engineering, University of Illinois at Urbana-Champaign, 1987
M.S. in Mechanical Engineering, S. Dakota School of Mines and Tech., 1983.
B. Tech in Mechanical Engineering, Indian Institute of Technology at Bombay India, 1982

SERVICE
George W. Laird Professor of Mechanical Engineering, 2005-
Professor, University of Delware, 1997-2005
Acting Chairman, Mechanical Engineering, University of Delaware, 1998-1999
Associate Professor, University of Delaware, 1992-1997
Assistant Professor, University of Delaware, 1987-92

OTHER RELATED EXPERIENCE
Visiting Professor of Mechanical Engineering at The Imperial College, London, U.K., and at University of Auckland, New Zealand, 6/93 - 8/93

CONSULTING
Gore, 1996-1999
LNP 1998
Bell Helicopters, 1995
Kaman Aerospace, 1993
General Motors, MI, 1992
Arco Chemicals, PA, 1991
DSM Research, Netherlands, 1991 Teijin Ltd., 1991.

STATE REGISTERED
No.

SELECTED PUBLICATIONS

Books and Conference Proceedings Edited

  1. S. G. Advani and Murat Sozer "Process Modeling in Composite Manufacturing", Marcel Dekker, Inc., 270 Madison Ave., NY, NY 10016, ( 2002).
  2. “Advanced Polymeric Materials” Editors, Dr. Gabriel O. Shonaike and S.G. Advani Technomics (USA) to be published in early 2002
  3. S. G. Advani and Abdallatiff, Guest Editors of Journal of Non-Newtonian Fluid Mechanics (1999).
  4. S. G. Advani and D. A. Siginer, "Rheology and Fluid Mechanics of Nonlinear Materials", FED, Vol. 243, (1997) (New York).
  5. D. A. Siginer and S. G. Advani, "Rheology and Fluid Mechanics of Nonlinear Materials", AMD, Vol. 217, (1996) (New York).
  6. S. G. Advani, Editor, Flow and Rheology in Polymeric Composites Manufacturing”, Elsevier Publishers, Amsterdam (1994).
  7. S. G. Advani and C. Beckermann, Guest Editors, Journal of Engineering Materials and Technology, Vol. 115, ASME Publishers, New York (1993).
  8. V. Kumar and S. G. Advani, Editors, Cellular Polymers, ASME MD, Vol. 38, New York (1992).
  9. S. G. Advani, W. R. Blain, W. P. de Wilde, J. W. Gillespie, Jr., O. H. Griffin, Jr., Editors, Computer Aided Design in Composite Material Technology III, Elsevier Applied Science Publishers, New York (1992).
  10. S. G. Advani and C. Beckermann, Editors, Heat and Mass Transfer in Solidification Processing, ASME HTD, Vol. 175, New York (1991).

Book Chapters

  1. S. G. Advani and Dimitrovova, “Capillary Effects in Fiber Bundles,” Surface Tension: Measurement, Theory and Applications, Editor: Stanley Hartland, Marcel and Dekkar, (in press) (2002).
  2. S.G. Advani and E.M. Sozer “Chapter 2.23: Resin impregnation in liquid molding processes”, Comprehensive Composite Materials, Editors-in-Chief A. Kelly, pp.808-890, Elsevier Science (2001).
  3. S.G. Advani and E.M. Sozer “Process Modeling and Optimization (article 4B), ASM International's Engineered Materials Handbook. Vol. 21: Composites, pp. 423-433 ASM International, Ohio (2001).
  4. S.G. Advani and K-T. Hsiao, "Heat Transfer During Mold Filling in Liquid Composite Manufacturing", Chapter 19 in Handbook of Porous Media, Edited by Dr. Kambiz Vafai, 845-891Published by Marcel Dekker, Inc., 270 Madison Ave., NY, NY 10016 (2000).
  5. Veronica Calado and S. G. Advani, "Theromosett Resin Cure Kinetics and Rheology" (pp.31-105) in Transport Processes in Composites. Edited by A. Loos and Raju Dave. (2000).
  6. S. G. Advani and Pavel Simacek "Modeling and Simulation of Flow, Heat Transfer and Cure" (pp.225-281) in Resin Transfer Molding For Aerospace Structures, Edited by Teresa Krukenberg and Rowan Paton, Kluwer Academic Publishers, Netherlands, (1999).
  7. S. G. Advani and Terry S. Creasy, "Rheology of Long Discontinuous Fiber Thermoplastic Composites" (pp. 843-892) in Advances in the Flow and Rheology of Non-Newtonian Fluids, Edited by D. A. Siginer, D.De Kee and R.P. Chhabra, Elsevier Publishers (1999).
  8. Advani S. G. and Lihwa Fong, "Resin Transfer Molding" to appear in Lubin's Handbook of Composites II, Edited by S.T. Peters (1997).
  9. Advani S. G. and S. Ranganathan, "Chapter 2: Fiber-Fiber and Fiber-Wall Interactions During the Flow of Non-Dilute Suspensions" (pp. 43-76) in Flow Induced Alignment in Composite Materials, Edited by D. C. Guell and T. D. Papathanasiou, Woodhead Publishing Ltd., Cambridge, England (1997).
  10. Advani, Suresh G., Stephen Shuler and Terry Creasy, "Chapter 8: Rheology of Long Fiber Composites in Sheet Forming" (pp. 323-370) in Sheet Forming of Composites, Edited by Debes Bhattacharrya, Elsevier Publishers, Amsterdam (1997).
  11. Advani S. G., "Chapter 1: Introduction” (pp. 1-8) in Flow and Rheology in Polymeric Composites Manufacturing, Edited by Suresh G. Advani, Elsevier Publishers, Amsterdam (1994).
  12. Tucker C. L. III and S. G. Advani, "Chapter 6: Processing of Short Fiber Systems" (pp. 147-202) in Flow and Rheology in Polymeric Composites Manufacturing, Edited by Suresh G. Advani, Elsevier Publishers, Amsterdam (1994).
  13. Lin, H. H., S. Ranganathan and S. G. Advani," Consolidation in Continuous Fiber Systems" (pp. 325-360) in Flow and Rheology in Polymeric Composites Manufacturing, Edited by Suresh G. Advani, Elsevier Publishers, Amsterdam (1994).
  14. Advani S. G., M. V. Bruschke and R. Parnas, "Chapter 12: Resin Transfer Molding" (pp. 465-516) in Flow and Rheology in Polymeric Composites Manufacturing, Edited by Suresh G. Advani, Elsevier Publishers, Amsterdam (1994).
  15. Advani S. G., "Chapter 10: Growth and Collapse of Bubbles in Viscoelastic Fluids" in Advances in Transport Processes, Vol. IX, pp. 445-500, Edited by R. A. Mashelkar and A. Muzumdar (1994).
  16. Advani, S. G., "Molding of Short Fiber Composites: Flow Processing" International Encyclopedia of Composites, Vol. III, Edited by Struat Lee, p.514-526, VCH Publishers (1990).

Journal Articles & Proceedings

  1. Roopesh Mathur, S. Yaralanda and S. G. Advani, " Genetic Algorithm Based Resistive Susceptor Design for Uniform HEating During the Induction Bonding Process," J. of Thermoplastic Composites (in press)
  2. Ali Gokce, Kuang-Ting Hsiao and Suresh G. Advani, "Branch and bound search to optimize injection gate locations in liquid composite molding processes," Composites Part A: Applied Science and Manufacturing, Volume 33, Issue 9, Pages 1263-1272 (2002)
  3. G. Estrada and S. G. Advani, "Experimental Characterization of the Influence of Tackifier Material on Preform Permeability," J. of Composite Materials Volume 36, Issue 19, Pages 2297-2310 (2002) .
  4. S. Comas-Cardona, S. Ziaee and S.G. Advani "Spatially Homogeneous Gelation in Liquid Composite Molding" Polymer Engineering and Science 42, pp. 1667-1673 (2002).
  5. Pavel B. Nedanov, Suresh G. Advani, "Numerical computation of the fiber preform permeability tensor by the homogenization method", Polymer Composites, volume 23, pp.758-770 (2002).
  6. Pavel Simacek and Suresh G. Advani, "An analytic solution for the temperature distribution in flow through porous media in narrow gap. II. Radial injection," Heat and Mass Transfer , 38, pp. 497-505 (2002).
  7. Jeffrey M. Lawrence, Kuang-Ting Hsiao, Roderic C. Don, Pavel Simacek, Gonzalo Estrada, E. Murat Sozer, Hubert C. Stadtfeld and Suresh G. Advani "An approach to Couple Mold Design and On-line Control to Manufactur Complex Composite Parts by Resin Transfer Molding," Composites part A: Applied Science and Manufacturing, Volume 33, Issue 7 pp 981-990 (2002).
  8. K.-T. Hsiao and S. G. Advani, “A Method to Predict Microscopic Temperature Distribution Inside a Periodic Unit Cell of Non-isothermal Flow in Porous Media,” J. of Porous Media Volume 5, Pages 69-86 (2002).
  9. H.C. Stadfeld, M. Erninger, S. Bickerton and S. G. Advani, "An Experimental method to continuously measure Permeability of Fiber Preforms as a function of Fiber Volume Fraction," Journal of Reinfoced Plastics and Composites, Volume 21, pp. 879-900 (2002).
  10. Nedanov, Pavel B., Advani, Suresh G., A method to determine 3D permeability of fibrous reinforcements, Journal of Composite Materials, Volume 36, Issue 2, Pages 241-254 (2002).
  11. Sylvia R. M. Kueh, Richard S. Parnas and Suresh G. Advani, “Methodology for using long-period gratings and mold-filling simulations to minimize the intrusiveness of flow sensors in liquid composite molding,” Composites Science and Technology, 62, (2), pp. 311-327 (2002).
  12. Vincenza Antonucci, Michele Giordano, Kuang-Ting Hsiao and Suresh G. Advani “A methodology to reduce thermal gradients due to the exothermic reactions in composites processing”, International Journal of Heat and Mass Transfer, 45(8) pp. 1675-1684 (2002)
  13. Z. Dimitrovova and Suresh G. Advani, “Analysis and Characterization of Relative Permeability and Capillary Pressure for Free Surface Flow of a Viscous Fluid across an Array of Aligned Cylindrical Fibers,” J. of Colloid and Interface Science, 245, pp. 325-337 (2002).
  14. Aluru, R., M. Keefe and S. Advani, "Simulation of Injection Molding into Rapid-Prototyped Molds," Rapid Prototyping Journal, Vol. 17, No. 1, ( 2001).
  15. Pavel Simacek and Suresh G. Advani "An Analytic Solution for the Temperature distribution in flow through porous media in narrow gapS: I - Linear Injection,", Heat and Mass Transfer 38 (2001) 25-33
  16. N. Prabhu, J. Schultz, S. Advani and K. Jacobs “Role of Coupling the Microscopic and Macroscopic Phenomena during the Crystallization of Semicrystalline Polymers" Polymer Engineering and Science 41, pp 1871-1885 (2001).
  17. Joy P. Dunkers, Joseph L. Lenhart, Sylvia R. Kueh, John H. van Zanten, Suresh G. Advani and Richard S. Parnas “Fiber optic flow and cure sensing for liquid composite molding,” Optics and Lasers in Engineering 35(2), pp. 91-104 (2001).
  18. A.Gokce and S. Advani, "Permeability Estimation with the Method of Cells", J. of Composite Materials 35(8), pp.713-728 (2001).
  19. K.-T. Hsiao, H. Laudorn, S. G. Advani, Experimental Investigation of Heat Dispersion Due to Impregnation of Viscous Fluids in Heated Fibrous Porous During Composites Processing, ASME J. of Heat Transfer, Vol. 123, pp178-187, 2001.
  20. R. Mathur, D. Heider, C. Hoffmann, J. W. Gillespie Jr., S.G. Advani and B.K. Fink, “Flow Front Measurements and Model Validation in the Vacuum Assisted Resin Transfer Molding Process” Polymer Composites Vol. 22, pp.477-490 (2001).
  21. K. T. Hsiao, J. W. Gillespie, Jr.,S. G. Advani and B. K. Fink, “Role of Vacuum Pressure and Port Locations on Flow Front Control for Liquid Composite Molding Processes, Polymer Composites, Vol. 22, pp.660-668 (2001).
  22. S. Roychowdhury, J.W. Gillespie, Jr. and S.G. Advani, "Volatile-Induced Void Formation in Amorphous thermoplastic Polymeric Materials: I. Modeling and Parametric Studies", Journal of Composite Materials 35, pp 340-366 (2001)
  23. Simon Bickerton, Hubert C. Stadtfeld, Karl V. Steiner and Suresh G. Advani, “Design and application of actively controlled injection schemes for resin-transfer molding,” Composites Science and Technology, 61, pp. 1625-1637 (2001).
  24. J. Slade, K. Pillai, and S. G. Advani, “Investigation of unsaturated flow in woven, braided and stitched fiber mats during mold-filling in resin transfer molding”, Polymer Composites Vol. 22, pp.491-505 (2001).
  25. M. G. Joshi, M. H. Santare and S. G. Advani, "A Survey of Stress Analysis of the Hip Prosthesis", Applied Mechanics Reviews, 53,pp. 1-18 (2000).
  26. K. B. Moses, S. G. Advani and A. Reinhardt, “Investigation of Fiber Motion near Solid Boundaries in Simple Shear Flow,” Rheological Acta, 39 pp. 1655-1662 (2000).
  27. Mathur,R., Advani, S.G. , Fink, B.K., "A Sensitivity-based Gate Location Algorithm for Optimal Mold Filling During the Resin Transfer Molding Process", Advances in Computational Engineering and Sciences, Tech Science Press, Volume 1, pp 138-144 (2000).
  28. M. G. Joshi, S. G. Advani, F. Miller, M. H. Santare, “Analysis of a femoral hip prosthesis designed to reduce stress shielding”, J. of Biomechanics, 33 pp. 1655-1662 (2000).
  29. K. Pillai, A. Benard, K. Jacob and S. G. Advani, “Numerical Simulation of Crystallization in HDPE Extrudates,” Journal of Polymer Engineering and Science, 40 ,pp. 2356-2373 (2000).
  30. Sozer, E. M., Bickerton, S., and S.G. Advani, “On-line strategic control of liquid composite mold filling process”, Composites part A: Applied Science and Manufacturing, 31, p 1383-1394 (2000)
  31. Hsiao, K. T., Mathur, R., Gillespie, J. W., Fink, B. K., Advani, S. G., " A Closed Form Solution for the vacuum Assisted Resin Transfer Molding Process", Journal of Manufacturing Science, 122,pp. 463-472 (2000).
  32. Kueh, Sylvia R.M., Advani, Suresh G., Parnas, Richard S., Sensor Placement Study For Online Flow Monitoring In Liquid Composite Molding, Polymer Composites 21 pp. 436-449 (2000).
  33. M. Indermaur, P. Simacek and S. G. Advani, "The Influence of Draping on the Filling of Doubly Curved Molds in the Resin Transfer Molding Process", International Journal of Forming Processes 2, pp.321-352 (2000).
  34. Laval, N., Sozer, E. M., and S.G. Advani, “Characterization of permeability around a 90o corner” Advanced Composite Letters, 9(1): pp.17-24, (2000).
  35. Pavel Nedanov and S. G. Advani, “Mold Filling Simulation of Sandwich Composite Structures manufactured by Liquid Molding: A Parametric Study,” J. of Sandwich Structures and Materials, 2,pp. 117-130 (2000).
  36. S. Bickerton, E. M. Sozer, P. J. Graham, and S. G. Advani, "Fabric Structure and Mold Curvature Effects on Preform Permeability and Mold Filling in the RTM Process, Part I: Experiments", Composites - Part A: Applied Science and Manufacturing, A(31):pp. 423-438, (2000).
  37. S. Bickerton, E. M. Sozer, P. Simacek, and S. G. Advani, "Fabric Structure and Mold Curvature Effects on Preform Permeability and Mold Filling in RTM Process, Part II: Predictions and Comparisons with Experiments", Composites - Part A: Applied Science and Manufacturing, A(31): pp. 439-458, (2000).
  38. J. Slade, M. Sozer, and S. Advani, “Effect of shear deformation on permeability of fiber preforms”, Journal of Reinforced Plastics and Composites 19 pp. 552-568 (2000).
  39. S. Bickerton, S.G. Advani, R.V. Mohan and D.R. Shires, "Experimental Analysis and Numerical Modeling of Flow Channel Effects in Resin Transfer Molding", Polymer Composites 21, pp.134-153(2000).

SOCIETIES
American Society of Engineering Education
American Society of Mechanical Engineers
Society of Plastic Engineers
Polymer Processing Society
Society of Rheology

HONORS & AWARDS
N. American Editor, Composites Part A, Applied Science and Manufacturing
Best Paper Award, "Composites Manufacturing and Tooling Conference", Society of Manufacturing Engineers, Newport Beach, California, 2000
Fellow of American Society of Mechanical Engineers, 1999
Scientific Advisory Committee, J. of Forming Processes
Dean's Merit Raise: 1989,1990,1991,1992,1993,1994,1995,1997,1999
Provost's Special Merit Raise, 1996
Keynote Speaker, SAMPE, 1997
Best Paper Award at American Controls Conference, 1997
Best Paper Award at American Composites Conference, 1995
Listed in Who's Who in Plastics and Polymers, 2000 - Present
Listed in Who's Who in America, 2000 - Present
Listed in Who's Who Among Asian Americans,1994 - Present
Listed in American Men and Women in Science, 1992 - Present
Listed in Who's Who in Science and Engineering, 1994 - Present
Scientific Advisory Committee, ISATA
Visiting Professor, University of Auckland, New Zealand, 1993
Visiting Professor, Imperial College, London, England, U.K., 1993
Selected by United Nations to be a part of TOKTEN Programme, August 1993
Guest Editor, Jan 1993 - ASME Journal of Engineering Materials and Technology
Chairman, Polymer Technical Committee, ASME 1991-1993
Best Paper awarded by Society of Plastic Engineers, 1990
International Travel Award 1988-89
Bell Laboratory Fellowship 1985-86
Deans' List 1983
Class of Distinction 1982
National Scholarship Award 1978

COURSES TAUGHT
Sensor Placement Study For Online Flow Monitoring In Liquid Composite Molding, Polymer Composites 21 pp. 436-449 (2000).
M. Indermaur, P. Simacek and S. G. Advani, "The Influence of Draping on the Filling of Doubly Curved Molds in the Resin Transfer Molding Process", International Journal of Forming Processes 2, pp.321-352 (2000).
Laval, N., Sozer, E. M., and S.G. Advani, “Characterization of permeability around a 90o corner” Advanced Composite Letters, 9(1): pp.17-24, (2000).
Pavel Nedanov and S. G. Advani, “Mold Filling Simulation of Sandwich Composite Structures manufactured by Liquid Molding: A Parametric Study,” J. of Sandwich Structures and Materials, 2,pp. 117-130 (2000).
S. Bickerton, E. M. Sozer, P. J. Graham, and S. G. Advani, "Fabric Structure and Mold Curvature Effects on Preform Permeability and Mold Filling in the RTM Process, Part I: Experiments", Composites - Part A: Applied Science and Manufacturing, A(31):pp. 423-438, (2000).
S. Bickerton, E. M. Sozer, P. Simacek, and S. G. Advani, "Fabric Structure and Mold Curvature Effects on Preform Permeability and Mold Filling in RTM Process, Part II: Predictions and Comparisons with Experiments", Composites - Part A: Applied Science and Manufacturing, A(31): pp. 439-458, (2000).
J. Slade, M. Sozer, and S. Advani, “Effect of shear deformation on permeability of fiber preforms”, Journal of Reinforced Plastics and Composites 19 pp. 552-568 (2000).
S. Bickerton, S.G. Advani, R.V. Mohan and D.R. Shires, "Experimental Analysis and Numerical Modeling of Flow Channel Effects in Resin Transfer Molding", Polymer Composites 21, pp.134-153(2000).

OTHER INFORMATION
Advani, Suresh G., A method to determine 3D permeability of fibrous reinforcements, Journal of Composite Materials, Volume 36, Issue 2, Pages 241-254 (2002).
Sylvia R. M. Kueh, Richard S. Parnas and Suresh G. Advani, “Methodology for using long-period gratings and mold-filling simulations to minimize the intrusiveness of flow sensors in liquid composite molding,” Composites Science and Technology, 62, (2), pp. 311-327 (2002).
Vincenza Antonucci, Michele Giordano, Kuang-Ting Hsiao and Suresh G. Advani “A methodology to reduce thermal gradients due to the exothermic reactions in composites processing”, International Journal of Heat and Mass Transfer, 45(8) pp. 1675-1684 (2002)
Z. Dimitrovova and Suresh G. Advani, “Analysis and Characterization of Relative Permeability and Capillary Pressure for Free Surface Flow of a Viscous Fluid across an Array of Aligned Cylindrical Fibers,” J. of Colloid and Interface Science, 245, pp. 325-337 (2002).
Aluru, R., M. Keefe and S. Advani, "Simulation of Injection Molding into Rapid-Prototyped Molds," Rapid Prototyping Journal, Vol. 17, No. 1, ( 2001).
Pavel Simacek and Suresh G. Advani "An Analytic Solution for the Temperature distribution in flow through porous media in narrow gapS: I - Linear Injection,", Heat and Mass Transfer 38 (2001) 25-33
N. Prabhu, J. Schultz, S. Advani and K. Jacobs “Role of Coupling the Microscopic and Macroscopic Phenomena during the Crystallization of Semicrystalline Polymers" Polymer Engineering and Science 41, pp 1871-1885 (2001).
Joy P. Dunkers, Joseph L. Lenhart, Sylvia R. Kueh, John H. van Zanten, Suresh G. Advani and Richard S. Parnas “Fiber optic flow and cure sensing for liquid composite molding,” Optics and Lasers in Engineering 35(2), pp. 91-104 (2001).
A.Gokce and S. Advani, "Permeability Estimation with the Method of Cells", J. of Composite Materials 35(8), pp.713-728 (2001).
K.-T. Hsiao, H. Laudorn, S. G. Advani, Experimental Investigation of Heat Dispersion Due to Impregnation of Viscous Fluids in Heated Fibrous Porous During Composites Processing, ASME J. of Heat Transfer, Vol. 123, pp178-187, 2001.
R. Mathur, D. Heider, C. Hoffmann, J. W. Gillespie Jr., S.G. Advani and B.K. Fink, “Flow Front Measurements and Model Validation in the Vacuum Assisted Resin Transfer Molding Process” Polymer Composites Vol. 22, pp.477-490 (2001).
K. T. Hsiao, J. W. Gillespie, Jr.,S. G. Advani and B. K. Fink, “Role of Vacuum Pressure and Port Locations on Flow Front Control for Liquid Composite Molding Processes, Polymer Composites, Vol. 22, pp.660-668 (2001).
S. Roychowdhury, J.W. Gillespie, Jr. and S.G. Advani, "Volatile-Induced Void Formation in Amorphous thermoplastic Polymeric Materials: I. Modeling and Parametric Studies", Journal of Composite Materials 35, pp 340-366 (2001)
Simon Bickerton, Hubert C. Stadtfeld, Karl V. Steiner and Suresh G. Advani, “Design and application of actively controlled injection schemes for resin-transfer molding,” Composites Science and Technology, 61, pp. 1625-1637 (2001).
J. Slade, K. Pillai, and S. G. Advani, “Investigation of unsaturated flow in woven, braided and stitched fiber mats during mold-filling in resin transfer molding”, Polymer Composites Vol. 22, pp.491-505 (2001).
M. G. Joshi, M. H. Santare and S. G. Advani, "A Survey of Stress Analysis of the Hip Prosthesis", Applied Mechanics Reviews, 53,pp. 1-18 (2000).
K. B. Moses, S. G. Advani and A. Reinhardt, “Investigation of Fiber Motion near Solid Boundaries in Simple Shear Flow,” Rheological Acta, 39 pp. 1655-1662 (2000).
Mathur,R., Advani, S.G. , Fink, B.K., "A Sensitivity-based Gate Location Algorithm for Optimal Mold Filling During the Resin Transfer Molding Process", Advances in Computational Engineering and Sciences, Tech Science Press, Volume 1, pp 138-144 (2000).
M. G. Joshi, S. G. Advani, F. Miller, M. H. Santare, “Analysis of a femoral hip prosthesis designed to reduce stress shielding”, J. of Biomechanics, 33 pp. 1655-1662 (2000).
K. Pillai, A. Benard, K. Jacob and S. G. Advani, “Numerical Simulation of Crystallization in HDPE Extrudates,” Journal of Polymer Engineering and Science, 40 ,pp. 2356-2373 (2000).
Sozer, E. M., Bickerton, S., and S.G. Advani, “On-line strategic control of liquid composite mold filling process”, Composites part A: Applied Science and Manufacturing, 31, p 1383-1394 (2000)
Hsiao, K. T., Mathur, R., Gillespie, J. W., Fink, B. K., Advani, S. G., " A Closed Form Solution for the vacuum Assisted Resin Transfer Molding Process", Journal of Manufacturing Science, 122,pp. 463-472 (2000).
Kueh, Sylvia R.M.