University of Delaware
Department of Mechanical Engineering
About ME
People
Research
Academics
Admissions
Resources
Alumni
News & Events
UD Home
College Home
Map & Directions
webmail
126 Spencer Lab, U. of D., Newark, DE 19716-3140 ph: 302-831-3140 fax: 302-831-3619
 
 
 
 
 
 
 
 
 
Dr. Ian W. Hall

Associate Professor
Department of Mechanical Engineering
University of Delaware
126 Spencer Lab.
Newark, DE 19716
E-mail: halliw@udel.edu

Dr. Hall's personal homepage

 

DEGREES
Ph.D., University of Leeds, U.K., March 1974
B.Sc. (Hons.), Metallurgy, Department of Metallurgy, University of Leeds, June 1970


SERVICE
Chairperson, Materials Science Program, University of Delaware, September 1989-1996
Associate Professor, Department of Mechanical Engineering, University of Delaware, May 1987-present
Assistant Professor, Department of Mechanical Engineering, University of Delaware, 1982-1987
Visiting Assistant Professor, Department of Mechanical Engineering, University of Delaware, 1980-1982


OTHER RELATED EXPERIENCE
Lady Davis Research Fellow, Department of Materials Engineering, Technion, Haifa, Israel, 1978-1980
Lecturer, Department of Metallurgy, Technical University of Denmark, 1975-1978
Post Doctoral Research Fellow, Metallurgy Department, University of Leeds, U.K., 1973-1975


CONSULTING
Erachem Comilog
Shell Oil Company
Morgan, Lewis & Bockius, LLP
Roux Associates Inc.
Sun Refining Company, Inc.
State Farm Insurance
Edgecraft Corporation
Regnante, Sterio * Osborne, LLP
Agilent Technologies


STATE REGISTERED
NONE


SELECTED PUBLICATIONS
Journal Articles & Proceedings

  1. "High Strain Rate Properties of an SiCw/2124-T6 Aluminum Composite at Elevated Temperatures", M. Guden and I. W. Hall, Scripta Materialia, 39 (1998) 261.
  2. "Investigation of Interfacial Reactivity in Composite Materials", Constantin Vahlas, Ian W. Hall, Isabelle Haurie, Matls. Sci. & Eng. A, A259 (1999) 269.
  3. "Microstructural Effects in Hot-Explosively-Consolidated W-Ti Alloys", Laszlo J. Kecskes, Ian W. Hall, J, of Matls. Proc. Technology, 94, 1999. p. 247.
  4. "High Strain Rate Properties of an Alumina Dispersion Reinforced Composite", I. W. Hall, Proc. 12th Int. Conf. Comp. Matls., Paris, July 1999.
  5. "High Strain Rate Deformation Behavior of Metal Matrix Composites", M. Guden and I. W. Hall, Metalurji, 23, No 119, 1999, p. 20.
  6. "High Strain-Rate Response of Hot-Explosively Consolidated W-Ti Alloys", L. J. Kecskes and I. W. Hall, J. Mat. Res., 14, 1999, p. 2838.
  7. "High Strain Rate Deformation Behavior of a Continuous Fiber Reinforced Aluminum Metal Matrix Composite", M. Guden and I. W. Hall, Computers and Structures, 76, 2000, p. 139.
  8. "Chemical Vapor Deposition of Aluminum on Silicon Carbide for the Investigation of Interfacial Microstructure in Discontinuously Reinforced Aluminum", Pablo Ortiz, Djar Oquab, Constantin Vahlas and Ian W. Hall, Proc. 12ème Journées Nationales sur les Composites, (O. Allix, C. Cluzel and L. Lamin, eds.), AMAC, 2000, p. 817.
  9. "Ultra-Lightweight Aluminum Foam Materials for Automotive Applications", T. D. Claar, C.-J. Yu, I. Hall, J. Banhart, J. Baumeister, M. Weber and W. Seeliger, Int. J. Powder Metallurgy, 36, 2000, p. 61.
  10. "Chemical Vapor Deposition of Aluminum on Silicon Carbide for the Investigation of Interfacial Microstructure in Discontinuously Reinforced Aluminum", Pablo Ortiz, Djar Oquab, Constantin Vahlas and Ian W. Hall, Electrochem. Soc. Proc., CVD XV, (M.D. Allendorf & M.L. Hitchman, eds.), 2000-13, p. 300.
  11. "Crushing of Aluminum Closed Cell Foams: Density and Strain Rate Effects", I. W. Hall, M. Guden & C.-J. Yu, Scripta Materialia, 43, 2000, p. 515.
  12. "High Strain Rate Testing of a Unidirectionally Reinforced Graphite Epoxy Composite", I. W. Hall and M. Guden, J. Mat. Sci. Lett., 20 (2001) p.897.
  13. "Quasi-static and Dynamic Crushing of Empty and Foam-filled Tubes", I. W. Hall, O. Ebil, M. Guden and C.-J. Yu, J. Mat. Sci, 36 (2001) p. 5853.
  14. "Toward the Improvement of Microstructure of Chemical Vapor Deposited Aluminum on Silicon Carbide", C. Vahlas, P. Ortiz, D. Oquab & I. W. Hall, J. Electrochem. Soc., 148 (2001) p. 583.
  15. "Transverse and Longitudinal Crushing of Aluminum-Foam Filled Tubes", I. W. Hall, M. Guden and T.D. Claar, Scripta Mat. 46 (2002) p. 513.
  16. "Improving the Energy Absorption of Closed Cell Aluminum Foams", S. A. Greene, I. W. Hall and M. Guden, J. Mat. Sci. Lett., 21 (2002) p. 1591.

SOCIETIES
American Society for Metals, Brandywine Valley Chapter
Electron Microscopy Society of America
The Metallurgical Society of A.I.M.E.
Materials Research Society
National Association of Corrosion Engineers
American Society of Engineering Education


HONORS & AWARDS
Recipient of the 1982 Buehler Technical Paper Merit Award


COURSES TAUGHT
Statics (MEEG 112)
Materials Engineering (MEEG 321)
Metals and Alloys (MEEG 658)
Materialography (MEEG 667)
Material Science for Engineers (MSEG 302)
Structure of Materials (MSEG 602)
Analytical Techniques in Materials Science (MSEG 603)
Phase Transformations (MSEG 604)
Transmission Electron Microscopy in Materials Science (MSEG 823)

OTHER INFORMATION
N/A