Conference Publications

Search2016:2015 2014 2013 2012 2011 2011|2010||2009|2008|2007|2006|2005|2004|2003|2002|2001| 2000|1999 |1998 |1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 |1989|1988-84
2016

235. Ghnatios, Chady, Abisset-Chavanne, Emmanuelle; Binetruy, Christophe; Chinesta, Francisco; Advani, S. G.  “3D simulation of composite strands compression molding by using the proper generalized decomposition,” ECCM - Proceeding of the 17th European Conference on Composite Materials, 2016.

234.    M Yeager, P Simacek, S Advani,” Microvoid Formation in Fiber Tows with Non-Uniformly Spaced Fibers”, Proceedings of the American Society for Composites: 31st Technical Conference, ASC 2016.

233.     Sherwood, J, Hansen, C.; Drane, P.; Gorczyca, J.; White, K.; Reynaud, E.; Walczyk, D.; Advani, S.; Dayal, V.; Overcash, M.; Kinsey, B.; Gross, T.; Lashmore, D.; Tsukrov, I.; Nutt, S.; Boeman, R.; Dobbins, T.; Coughlin, D.; Schoenberg, A.; Von Vogt, S. ,” An overview of the NIST FIBERS roadmap to advance the state of composites manufacturing in the U.S. “ Proceedings of the American Society for Composites - 31st Technical Conference,, 2016.

232.    Yu, Hong, Heider, Dirk, Advani, Suresh, “3D resistor network model for predicting electrical conductivity of CFRP,” International SAMPE Technical Conference, Long Beach 2016.

231. Yun, Minyoung, Sas, Hatice; Simacek, Pavel; Advani, Suresh , "Fabric and textile 3D permeability characterization work-station," International SAMPE Technical Conference, SAMPE Long Beach 2016.

230. Wang, Liang,  Advani, Suresh G.; Prasad, Ajay K.  “ Self-healing composite membranes for fuel cell applications,” Advanced Materials - TechConnect Briefs 2016, v 2, p 96-97, 2016, Materials for Energy, Efficiency and Sustainability – 2016.
  
229. Yeager, M., Simacek, P.; Advani, S.G. ,"
Microvoid formation in fiber tows with non-uniformly spaced fibers," Proceedings of the American Society for Composites - 31st Technical Conference, 2016.

2015

228. S. Sas, P. Simacek, S. G. Advani, A Methodology to Reduce Variability in VARTM with Optimized Design of Distribution Media, Society for the Advancement of Material and Process Engineering (SAMPE), Baltimore, May 2015.

227. Pavel Simacek, Justin Merotte and S G Advani,” Compression resin transfer molding simulation for net shape manufacturing of composite structures for automotive applications,” SAMPE, May 18-21 2015, Baltimore, May 2015.

226. Yeager, M., P. Simacek, S. G. Advani, “A Model for Void Formation and Movement Through Fiber Tows,” The Composites and Advanced Materials Expo (CAMX), Dallas, TX, October 26-29, 2015.

225. Yeager, M., W. R. Hwang, and S. G. Advani, “Prediction of Capillary Pressure for Resin Flow within Fiber Unit Cells,” American Society for Composites 30th Technical Conference, East Lansing, MI, September 28-30, 2015.

224. Yeager, M., P. Simacek, S. G. Advani, “Multiscale Flow Modeling and Simulation to Predict Void Formation and Transport in Composite Manufacturing,” 10th International Workshop on Structural Health Monitoring, Stanford, CA, September 1-3, 2015.


223. Yeager, M., and S. G. Advani, "Resin Flow into Fiber Tows: Role of Fiber Microstructure," SAMPE 2015, Baltimore, MD, May 18-21, 2015.


222. Yeager, M., R. Ganesh, S. Yarlagadda, S.G. Advani, J. W. Gillespie Jr. “A Unit Cell Model to Predict Impact of Geometric and Processing Parameters on Energy Absorbed by Fiber Composites.” Mach Conference 2015, Annapolis, MD, April 8-10, 2015.


221. S. G. Advani and P. Simacek, “Liquid Composite Molding: Role Of Modeling And Simulation In Process Advancement,” International Conference on Composite Materials, ICCM-20, Copenhagen, July 2015

2014

220. H. S. Sas, A. Abu-Obaid, P. Simacek, J. W. Gillespie, S. G. Advani, "Thermoset Pultrusion Process: Modeling and Experimental Characterization", CAMX , Orlando, October 13-16, 2014.

219. J. Wang, P. Simacek, S.G. Advani, University of Delaware, "Robust Manufacturing Process Design with Liquid Composite Molding Simulation", CAMX, Orlando, FL. October 13-16, 2014.


218. M. Yeager, and S. G. Advani, "Parametric Study of Fiber Tow Wetting by Finite Volume of Resin," SAMPE Seattle 2014, Seattle, WA, June 2-5, 2014.


217. M. Yeager, S. G. Advani, S. Yarlagadda. "Dynamics of Wetting on Fiber Surfaces by a Finite Volume of Resin." Mach Conference 2014, Annapolis, MD, April 9-11, 2014.


216. T.A. Cender, J.J. Gangloff Jr, P. Simacek, S.G. Advani “Void Reduction During Out-of-Autoclave Thermoset Prepreg Composite Processing” SAMPE Technical Conference, Seattle, WA.  June 2- 5, 2014.


215.. J.J. Gangloff Jr, T.A. Cender, V. Eskizeybek, P. Simacek, S.G. Advani. “In Situ Flow Visualization of Void Migration During Out-of-Autoclave Thermoset Prepreg Processing” Flow Processes in Composite Materials 12. Enschede, Netherlands. July 14-16, 2014.


214. T.A. Cender, V. Eskizeybek, J.J. Gangloff Jr., P. Simacek, S.G. Advani "Void Entrapment into Air Pathways in Partially Impregnated Prepregs in the Out-of-Autoclave Process” American Society for Composites (ASC) 29th Technical Conference, San Diego, CA. Sept. 8-10, 2014.

2013
213. H. Yu, A. Nonn, D. Heider, and S.G. Advani, "Modeling and Characterization of The Through-thickness Thermal Conductivity of Polymer Composites Using Infrared Camera", American Society for Composites 28th Technical Conference, State College, PA, September 9–11, 2013.

212. T.A. Cender , P. Simacek , S.G. Advani “Gas Permeability of Partially Saturated Fabrics” The 19th International Conference on Composite Materials, Montreal, Canada, July 28 - August 2, 2013.

211. P. Simacek and S.G. Advani, “Modeling of non-isothermal liquid composite molding: the heat dispersion issue,” The 19th International Conference on Composite Materials, Montreal, Canada, July 28 - August 2, 2013.

210. J. Wang, P. Simacek and S.G. Advani, "Multiple Gate Injection Optimization in Liquid Composite Molding", SAMPE Conference & Exposition, Long Beach, CA., May 6-9, 2013.

209. J.J. Gangloff Jr., C. Daniel, S.G. Advani, “Modeling of In-Plane Void Transport during Composites Processing,” ICCM-19 Montreal, QC, CA, July 28-August 2, 2013.

208. J. E. Mueller, J. W. Gillespie Jr., S. G. Advani, "Diffusion as a Bonding Mechanisms for Ultrasonically Consolidated Metal Matrix Composites", SAMPE Conference & Exposition, Long Beach, CA., May 6-10, 2013.

207. J. M. Sietins, J. W. Gillespie Jr., S. G. Advani, "Bonding Mechanisms during Ultrasonic Consolidation: New Insight Utilizing FIB Milling and TEM", JISSE Conference, Nagoya, Japan, Nov. 11-14, 2013.

2012

206. J.J. Gangloff Jr., R. Readdy, and S.G. Advani, "The Effects of Targeted Applied Vibrations to Promote Void Reduction During Composites Processing", SAMPE Conference & Exposition, Baltimore, MD., May 21-24, 2012.

 

205. J.J. Gangloff Jr., W. R. Hwang, and S. G. Advani, "Modeling Void Drainage with Thin Film Dynamics", Proceedings of the COMSOL 2012 Conference, Boston, MA., October 3-5, 2012.

 

204. Hatice Sinem Sas, Eric B. Wurtzel, Pavel Simacek, Suresh Advani. “Effect Of Fiber Orientation On The Through-Thickness Permeability Of Unidirectional Fabrics.” SAMPE 2012 Proceedings, Baltimore MD.

 

203. Jennifer E. Mueller, John W. Gillespie, Jr., Suresh G. Advani, "Interaction volume effects of ultrasonically consolidated Cu-Al concentration profiles" SAMPE conference proceedings, Baltimore, MD. May 2012.


202. J. Wang, E. Andres, P. Simacek, S.G. Advani , "Incorporating Process and Material Variability in Liquid Composite Manufacturing Simulations for Seamless Integration in Composite Design", SAMPE Conference & Exposition, Baltimore, MD. May 21-24, 2012.


201. Hang Yu, Martin Noll, Sven Schneiders, Dirk Heider, Suresh Advani, “Through Thickness Thermal Conductivity Enhancement for 3-D Fiber Composite,” SAMPE 2012, Baltimore, MD, May 21-24, 2012.


200. Gregory S. Kelly, Suresh G. Advani, John W. Gillespie, Jr. and Travis A. Bogetti. “Thermo-Mechanical Modeling of Acoustic Softening During Ultrasonic Consolidation of Thin Metal Foils”. SAMPE: Baltimore, Maryland, May 21-24, 2012.

199. J. Lugo, P. Simacek and S.G. Advani , “Method to Estimate Multiple Permeability Components from a Single Rectilinear Experiment in Liquid Molding Processes," FPCM-11, Auckland, NZ.


198. Cetinbas FC, Prasad AK, Advani SG, “Modeling the effect of discrete distributions of Platinum particles in the PEM fuel cell catalyst layer,” 2012 COMSOL Conference, Boston, MA.

 2011

197. J.J. Gangloff Jr., S.G. Advani, University of Delaware and S. Sinha, GE Global Research, "A Model for Tow Impregnation and Consolidation for Partially Impregnated Thermoset Prepregs, SAMPE Conference & Exposition, Long Beach, CA . May 23-26, 2011.

196. T.A. Cender, A. Abu-Obaid, P. Simacek, S.G. Advani , �Experimental Characterization of a Partially Pre-Impregnated Fabric for Out-of-Autoclave Processing, SAMPE Conference & Exposition, Long Beach, CA . May 23-26, 2011.

195. Pavel Simacek and Suresh G. Advani, �Modeling And Simulation of Nonisothermal Reactive Resin Flow In Liquid Composite Molding� ICCM-18 Jeju Island, South Korea,  August   (2011).

194. Wook Ryol Hwang and Suresh Advani, �Orientation Prediction Of Carbon Nanotubes In Dual-Scale Porous Media During Resin Infusion,� ICCM-18, Jeju Island, South Korea, August   (2011).

193. John Gangloff, Shatil Sinha, Pavel Simacek, Suresh G. Advani. � A Model for Wrinkle Compaction in Thermoset Prepreg Processing, �Proceedings of the 26th ASC Annual Technical Conference, September 26, 2011.

192. Erik Koepf, Suresh G. Advani Ajay K.  Prasad, �Design Of A Novel High Temperature Gravity-Fed Solar Thermochemical Reactor For Solar-Fuels Production: Case Study - Zno Powder, Proceedings of the 5th International Conference on Energy Sustainability, ASME ES2011, August 7-10, 2011, Washington DC, USA

2010
 

191. Vasan Chandrasekaran, Michael H. Santare and Suresh G. Advani, �Interlaminar Shear Strength Enhancement of Glass Fiber/Epoxy/Multiwalled Carbon Nanotube Hybrid Composites,� ASC and US-Japan Conferences: September 20-22, 2010 ASTM-D30 Meeting: September 22-23, 2010, Dayton Marriott, Dayton, Ohio .

190. Pavel Simacek and Suresh G. Advani, �Modeling the Resin Flow of Reactive Resins in Liquid Composite Molding,� Flow Processes in Composite Manufacturing, Ascona, Switzerland, July  (2010).

189. Wook Ryol Hwang and Suresh Advani, �Permeability predictions of dual scale fabrics using level set methods,� Flow Processes in Composite Manufacturing, Ascona, Switzerland, July  (2010).

188. Martinez, F., Simacek, P., & Advani, S. G. (2010).  �Comparison of modeling approaches to resin flow simulation in layered draped textile preforms.�  Recent Advances in Textile Composites: Proceedings of the 10th International Conference on Textile Composites, 463-471, Lillee, France (October 2010).

2009
187 . J. B. Alms, J. L. Glancey, and Suresh. G. Advani , �Mechanical Properties of Composite Structures Fabricated with the Vacuum Induced Preform Relaxation Process,� American Society for Composites, 24th Technical Conference and the Canadian Association for Composite Structures and Materials, September 15-17, University of Delaware (2009)

186. Vasan Chandrasekaran, Michael H. Santare and Suresh G. Advani, �Role of Processing on Interlaminar Shear Strength Enhancement of Glass Fiber/Epoxy/Multiwalled Carbon Nanotube Hybrid Composites,� American Society for Composites, 24th Technical Conference and the Canadian Association for Composite Structures and Materials, September 15-17, University of Delaware (2009)

185. Pavel Simacek and Suresh G. Advani, �Process Variability in Liquid Composite Molding and It�s Implications for Predictive Modeling,� American Society for Composites, 24th Technical Conference and the Canadian Association for Composite Structures and Materials, September 15-17, University of Delaware (2009)..

184. Claire Steggall, Shawn Walsh, Suresh G. Advani, and Shridhar Yarlagadda,� Energy Absorption In Powder-Impregnated Composites With Varied Void Fraction,� SAMPE: Baltimore, Maryland, May 18-21, 2009.

183. Valentin. Neascu, Lian-Ping Wang and Suresh G. Advani,� Lattice Boltzmann Method And Saturation Of Fiber Tows,� SAMPE: Baltimore, Maryland, May 18-21, 2009.

182. Pavel Simacek and  Suresh G. Advani,� Risk Mitigation With Liquid Molding Process Simulation,� SAMPE: Baltimore, Maryland, May 18-21, 2009..

181. . Hoellhoffer, Jenny Mueller, John W. Gillespie, Suresh G. Advani and Travis Bogetti,� Role Of Friction In Ultrasonic Consolidation During Processing Of Metal Matrix Composites,� SAMPE: Baltimore, MD, May 18-21, 2009.

180. J. B. Alms, J. L. Glancey, and Suresh. G. Advani,� Sequential Injection Using A Gantry Positioning System For Flow Control In Vacuum Resin Infusion Processes,� SAMPE: Baltimore, Maryland, May 18-21, 2009.

2008
179. J. B. Alms, J. L. Glancey, and S. G. Advani , �Vacuum Induced Preform Relaxation (VIPR) Process for Resin Flow Control in Vacuum Infusion Processes,� American Society for Composites, 23rd Technical Conference Proceedings (2008)

178. Valentin Neacsu, L.P. Wang and S.G. Advani, �Lattice Boltzmann Method for Microflow Analysis in Liquid Composite Molding,� Proceedings of the 9th International Conference in Flow Processes in Composite Materials, Montreal, Canada,(2008)

177. Claire Steggall, Pavel Simacek, Suresh G. Advani, and Shridhar Yarlagadda, �A Model for Thermoplastic Melt Impregnation of Fiber Bundles During Consolidation of Powder-Impregnated Continuous Fiber Composites,� Proceedings of the 9th International Conference in Flow Processes in Composite Materials, Montreal, Canada (2008).

176. Jeffrey Lawrence, S. T. Holmes, M. Louderback, P. Simaceck, S .G. Advani,, �The Use of Flow Simulations of Large Complex Composite Components Using the VARTM Process,� Proceedings of the 9th International Conference in Flow Processes in Composite Materials, Montreal, Canada, ( 2008).

175. Justin B. Alms, James L. Glancey, and Suresh G.Advani,� An Experimental Approach to Port-Based Injection in Vacuum Infusion Processing,� Proceeding sof the 9th International Conference in Flow Processes in Composite Materials, Montreal, Canada,  (2008).

174. Pavel Simacek, Prabhas Bhat, Timo Gebauer and Advani S.G., �Predictive Modeling of Composite Molding Processes: Simulation of Compression-Resin Transfer Molding Process for Manufacturing Net Shape Structures�, Proceeding sof the  CMMI Engineering Research and Innovation Conference, Knoxville, TN, (2008).

173. J. B. Alms, J. L. Glancey, and S. G. Advani,� Experimental Determination of Permeability of Woven Fiber Glass During the Vacuum Induced Preform Relaxation (VIPR) Process,� Proceedings of the 9th international conference on Textile Composites, Newark, DE 19716, October 13-15 (2008).

172. Claire Steggall, Pavel Simacek, Suresh G. Advani, and Shridhar Yarlagadda,� A Model to Describe Thermoplastic Resin Impregnation in a Unit Cell of a Fiber Tow Within a Textile Preform,� Proceedings of the  9th international conference on Textile Composites, Newark, DE 19716, October 13-15 (2008).

171. V. C. S. Chandrasekaran, M. H. Santare, and S. G. Advani,� Pseudo Reinforcement Effect of Multiwalled Carbon Nanotubes In Epoxy/Glass Fiber Hybrid Composites,� Proceedings of the 9th international conference on Textile Composites, Newark, DE 19716, October 13-15 (2008).

170. V. Neacsu, J.M. Lawrence, S.G. Advani, �Influence of Flow on Preform Saturation and Microvoids in Liquid Composite Molding,� SAMPE: Long Beach, CA, May 18-22, 2008. (also a proceedings paper)

169. J..B. Alms, J.L. Glancey, S.G. Advani,, �Experimental Validation of a Port Based Injection Methodology for Vacuum Infusion Processes,� International SAMPE Symposium and Exhibition (Proceedings), v 52, 2008, SAMPE'08 - Material and Process Innovations: Changing our World
 

168. C. Steggall, S.G. Advani, S. Yarlagadda, �Mechanical Properties and Energy Absorption of Powder-Impregnated Continuous Fiber Thermoplastic Matrix Composites� International SAMPE Symposium and Exhibition (Proceedings), v 52, 2008, SAMPE'08 - Material and Process Innovations: Changing our World

2007

167. P. Simacek, S.G. Advani , �Modeling and Simulation of Resin Flow in Resin Infusion Processes such as VARTM, VAP and Compression RTM,� International SAMPE Fall Technical Meeting (Proceedings), v 52, 2007

166.  J.Alms, J. Lawrence, A.Catry, J.Glancey and S.G. Advani, �Resin delivery and control workstation for VARTM,� The sixth Canadian Composites Conference (CANCOM), Winnipeg, Canada, August 2007.

165. J.M. Lawrence, V. Neacsu, S.G. Advani , �Modeling the Impact of Capillary Pressure and Air Entrapment on Fiber Tow Saturation During Resin Infusion in LCM,�  International SAMPE Symposium and Exhibition (Proceedings), v 52, 2007

164. C. Steggall, S. Yarlagadda, S.G. Advani,,� Effects of Pressure and Time on Fiber Bundle Impregnation in Powder-impregnated Thick Section Thermoplastic Composites,�  International SAMPE Symposium and Exhibition (Proceedings), v 52, 2007

163.. J. Alms, P. Simacek, S.G. Advani, �Quantitative Approach to Determine Bleeding Time for Complete Tow Saturation,�  International SAMPE Symposium and Exhibition (Proceedings), v 52, 2007.

162. J. M. Lawrence, P. Simacek and Suresh G. Advani, �New Features in Liquid Composite Molding Simulation to Address Modern Processing Methods�, 28th International Conference on Composite Materials, JEC 2007, Paris April 2007.

2006
 161. Arisetty S., Advani S.G., Prasad A.K., �Direct Methanol Fuel Cell for Multifunctional Composites,� presented at the 2006 Fuel Cell Seminar, November 13-17, 2006, Honolulu, Hawaii.

160. Zhang F.Y., Spernjak S., Advani S.G., Prasad A.K., �In-situ micro/nano transport characterization on catalyst layer in MEA of a PEM fuel cell,� presented at the 2006 Fuel Cell Seminar, November 13-17, 2006, Honolulu, Hawaii.

159. Spernjak D., Advani S.G., Prasad A.K., �Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell,� presented at the Fourth International ASME Conference on Fuel Cell Science, Engineering and Technology, June 19-21, 2006, Irvine CA.

158. J.M. Lawrence, P. Simacek and S.G. Advani, �New Advances in Modeling and Simulation
of Liquid Composite Molding Processes� SAMPE 2006: Creating New Opportunities for the World Economy, Long Beach, CA, April 30 � May 4, 2006.

157. N. Kuentzer, P. Simacek, S. Walsh and S.G. Advani, �Modeling and Simulation of Dual Scale Flow in Woven or Stitched Preforms in Liquid Molding Processes� SAMPE 2006: Creating New Opportunities for the World Economy, Long Beach, CA, April 30 � May 4, 2006.

156. P. Simacek and S.G. Advani, �Modeling and Simulation of Resin Flow in Resin Infusion Processes such as VARTM, VAP and Compression RTM,� SAMPE Fall Technical Conference
and Exhibition, November 6-9, 2006, Dallas, Texas
 

155. Suresh G. Advani, Fuping Zhou and Pavel Simacek, "Predictive Modeling of Composite Molding Processes: Simulation of Compression-Resin Transfer Molding Process for Manufacturing Net Shape Structures," 2006 NSF Design, Service and Manufacturing Grantees and Research Conference, Saint Louis, Missouri July (2006)

154. J. M. Lawrence, A.A. Obaid, S. Yaralagadda, J.W. Gillespie and Suresh G. Advani, �Processing and Properties of Embedded Metals in Composite Glass-Vinyl ester Composite Structures,� Advanced Materials Conference: Ship and Ground Vehicle Applications, Baltimore, MD, 2006

153. J.M. Lawrence, P. Simacek and Suresh G. Advani , �The Compression Resin Transfer Molding Process For Automotive Composite Components�, American Society for Composites 21tst Annual Technical Conference, Dearborn, MI, September 17-20, 2006

152. Jeffrey M. Lawrence, Pavel Simacek, Susanna Laurenzi, Suresh G. Advani, �Flow Modeling of the Compression Resin Transfer Molding Process� Proceedings of the 8th International conference on Flow Processes in Composites Manufacturing,� Douai, France, July 10-13 (2006).

151. Valentin Neacsu, Suresh G. Advani  and  Johannes Leisen, �Investigation of Capillary Flow Across a Bank of Aligned Fibers� Proceedings of the 8th International conference on Flow Processes in Composites Manufacturing,� Douai, France, July 10-13 (2006).

2005
150. Joseph Feser, Suresh G. Advani,  and  Ajay K. Prasad, � In Plane Permeability Measurements for Gas Diffusion Layers,� FUELCELL2005-74101, Ypsilanti, MI, May 23-25, 2005

149. Jeffrey M. Lawrence, Pavel Simacek, Ali Gokce, and Suresh G. Advani, � Use of Flow Simulation for Design, Optimization and Control of Liquid Composite Molding Processes,� Proceedings of the 20th Annual Technical Conference American Society for Composites, Philadelphia, PA, September 7-9, 2005.

148. Z. Fan, J. Alms, and S. G. Advani, �On Aligning Multi-Walled Carbon Nanotubes s to Enhance Interlaminar Strength of Fiber Reinforced Composites,� Proceedings of the 20th Annual Technical Conference American Society for Composites, Philadelphia, PA, September 7-9, 2005.

147. N. Kuentzer, S. Walsh and S. G. Advani, �Characterization of  Dual Scale Permeability in Composites Processing,� Proceedings of the 20th Annual Technical Conference American Society for Composites, Philadelphia, PA, September 7-9, 2005.

146. Z. Fan and  S.G. Advani, �Capillary Effects Of Multi-Walled Carbon Nanotube Suspension In Composite Processing,� Proceedings of the Polymer Processing Society , August 14-17, Quebec City, Canada (2005).

145. Ali Gokce, Ahmad Abuobaid, Shridhar Yarlagadda & Suresh G. Advani , �Manufacturing and Structural Performance of Composites with Interlaminar Inserts Using Vacuum Assisted Resin Transfer Molding,� proceedings of Intelligent Ships Symposium VI, Villanova University, Villanova, Pennsylvania, 1-2 June 2005

144. Valentin Neacsu, Ali Gokce, Pavel Simacek, Jeffrey M. Lawrence, Suresh G. Advani, "Role of Process Simulation in Liquid Composite Moulding," PROCEEDINGS OF THE 8th ESAFORM CONFERENCE ON MATERIAL FORMING, vol. II, page 881-884, Cluj-Napoca, Romania, 27-29 April 2005.

143.Gokce, A., A. Abu Obaid, S. Yarlagadda, and S. G. Advani, �Manufacturing and Structural Performance of Composites with Interlaminar Inserts using VARTM,� Proceedings of the SAMPE 2005 Symposium & Exhibition (50 th ISSE), Long Beach, CA, May 1-5, 2005 .

142.Neacsu, V., A. Abu Obaid, and S. G. Advani, �Role of Capillarity in Fiber Tow Impregnation During Composites Processing� Proceedings of the SAMPE 2005 Symposium & Exhibition (50 th ISSE), Long Beach, CA, May 1-5, 2005 .

141. Gokce, A., and S. G. Advani, �Permeability Estimation Algorithm to Predict the Permeability of the Distribution Media in VARTM,� Proceedings of the SAMPE 2005 Symposium & Exhibition (50 th ISSE), Long Beach, CA, May 1-5, 2005 .

140. Lawrence, J. M., P. Hughes, and S. G. Advani, �Dependence Map Based Control of Mold Filling in Liquid Composite Molding,� Proceedings of the SAMPE 2005 Symposium & Exhibition (50 th ISSE), Long Beach, CA, May 1-5, 2005
2004
139.Zhihang Fan and Suresh G. Advani,  " Rheology and Orientation of Multi-walled Carbon nanotube Suspensions in Shear Flows", Proceeding of Numiform conference, Ohio (2004).

138.Jeffrey M. Lawrence and Suresh G. Advani, �On-Line / Off-Line Control of Mold Filling in Liquid Composite Molding� Proceeding of 7th International Conference on Flow Processes in Composite Materials

137.Jeffrey M. Lawrence and Suresh G. Advani, �From Simulation to Production: Resin Transfer Molding for use in Intelligent Manufacturing of Composite Components�, SAMPE Long Beach 2004

136.Simacek, P., Gokce, A., Devillard, M., Advani, S.G., �Use of Mold Filling Simulations for Process Control and Automation in Liquid Composites Molding ,� 25th Jubilee International SAMPE Europe Conference 2004, of the Society for the Advancement of Materials and Process Engineering, 2004, p 337-343.

135.Simacek, P., Advani, S.G., �Role of Filling Simulation in LCM Process Design,� FPCM7 International Conference on Flow Processes in Composite Materials, 2004, p 319-326

134.Lawrence, Jeffrey M., Simacek, Pavel; Gokce, Ali; Hsiao, Kuang-Ting; Advani, Suresh G., From simulation to production: Intelligent manufacturing of composite components with resin transfer molding process, International SAMPE Technical Conference, SAMPLE 2004, 2004, p 483-495

133.Zuzana Dimitrovová, and S. G. Advani  �Numerical Method to Predict Void Formation During the Liquid Composite Molding Process,� FPCM7 International Conference on Flow Processes in Composite Materials, Newark, DE

132.J. H. Lee and L. Lin and S. G. Advani  � Preparation Of Clay/Glass Fiber/Epoxy Hybrid Nanocomposites Using VARTM,� FPCM7 International Conference on Flow Processes in Composite Materials, 2004

130. B. B. Johnson, M. H. Santare and J.E. Novotny,and S. G. Advani � Manufacturing and Performance of Carbon Nanotube/High Density Polyethylene Composites,� FPCM7 International Conference on Flow Processes in Composite Materials, 2004

129. Zhihang Fan, Wenzhong Tang, Kuang-Ting Hsiao, and Suresh G. Advani, �Flow and Dispersion of Multiwalled Carbon Nanotubes in Polymer and Fiberglass Reinforced Polymer Composites,� NSF Conference (2004).
2003

128. Jeffrey M. Lawrence, Mathieu Devillard, Ali Gokce, and Suresh G. Advani  �Intelligent Manufacturing During The Resin Transfer Molding Process To Increase Yield� ICCM-14, San Diego, CA, July 16, 2003 .

127. Suresh G. Advani and Pavel Simacek, �Role of Simulations in Processing and Control�, CACUM, Canada (2003).

126. Suresh G. Advani and Pavel Simacek, �Simulations and Modeling in Composites Processing,� ASC Meeting, Florida (2003).

125.Simacek and  S.G. Advani, �Simulation of Liquid Molding Processes,� 2003 ASME International Mechanical Engineering Congress and RD&D Expo Washington D.C., USA, November 15-21 (2003)

124. Santare, Michael H.; Novotny, John E.; Tang, Wenzhong; Advani, Suresh G., "Mechanical characterization of a nanotube-polyethylene composite material," American Society of Mechanical Engineers, Materials Division (Publication) MD, Volume 98, 2003, Pages 175-179

123. Zhou, Fuping; Advani, Suresh G.; Wetzel, Eric D., "Characterization of the viscous behavior of compacted ceramic particles under shear and pressure loads, American Society of Mechanical Engineers, Materials Division  MD, Volume 98, 2003, Pages 145-149

122. Lawrence, Jeffrey M.  Devillard, Mathieu; Advani, Suresh G.An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding,  Annual Technical Conference - ANTEC, Conference Proceedings, v 2, 2003, p 2079-2083

121. Devillard, Mathieu; Hsiao, Kuang-Ting; Advani, Suresh G, "Validation and implementation of control strategies for liquid composite molding processes, American Society of Mechanical Engineers, Materials Division (Publication) MD, Volume 98, 2003, Pages 45-48

2002

120.Ali Gokce and Suresh G. Advani, "Vent Optimization in Liquid Composite Molding Processes Using Probalistic Racetracking Forecast", 34th International SAMPE® Technical Conference, Baltimore, Nov 2002

119.Mathieu Devillard, Ali Gokce, K. T. Hsiao and Suresh G. Advani, "Addressing Flow Variations Due To Imperfect Fit Between Preform Edges And The Mold Walls In Resin Transfer Molding Process", Texcomp6, Philadelphia, 11th � 13th of September 2002.

118. Suresh G. Advani and Pavel Simacek, �Role of Simulations in Processing and Control�, Texcomp6, Philadelphia, 11th � 13th of September 2002.

117. Mathieu Devillard, H.T Hsiao and Suresh G. Advani, On-Line Race-Tracking Characterization And Flow Control In Resin Transfer Molding, 34th ISTC SAMPE, Baltimore

116. Mathieu Devillard, Kuang-Ting Hsiao, and Suresh G. Advani, "An Approach To Automate Sensing And Control Of Mold Filling In The Resin Transfer Molding Process," 2002 ASME-IMECE, New Orleans, November 17-22th of 2002.

115. B. Markicevic, D. Heider, S. T. Holmes, P. Handel, P. Minguet, J. W. Gillespie, Jr. and S. G. Advani �Numerical Investigation of Mold Filling of a Composite Part with Impermeable Core� 17th Technical Conference of the American Society for Composites West Lafayette, 2002

114. P. Simacek, D. Modi and S.G. Advani, "Numerical Issues in Mold Filling Simulations of Liquid Composites Processing," Tenth U.S.-Japan Conference on Composite Materials, Stanford, CA, September 16-18, 2002

113. P. Simacek and Suresh G. Advani, "Role of Sensors, Simulations and Control in Liquid Molding Processes", 34th International SAMPE® Technical Conference, Baltimore, Nov 2002

112. P.Simacek and S.G. Advani, "Combining Simulations and Experiments for "Intelligent Manufacturing Process Design," International Symposium on Mechanics of Composites, Prague, Czech Republic, October 14, 2002

111. Jeffrey M. Lawrence, Pavel Simacek, Suresh G. Advani, Numerical Mold Filling Simulations of Liquid Composite Molding Processes:Applications and Current Issues, 23rd International SAMPE Europe Conference and Tutorials/JEC Paris, France 2002

110. Correia, N.C.; Robitaille, F.; Long, A.C.; Rudd, C.D.; Simacek, P.; Advani, S.G., "Use of resin transfer molding simulation to predict flow, saturation and compaction in the VARTM process, American Society of Mechanical Engineers, Materials Division (Publication) MD, Volume 97, 2002, Pages 61-68

109. Dimitrovova, Z.; Advani, S. , "The role of relative permeability in simulation of RTM process filling phase,  International Conference on Computational Structures Technology - Proceedings, 2002, p 311-312

108. Hsiao, Kuang-Ting Devillard, Mathieu; Advani, Suresh G. Source:Streamlined intelligent RTM processing: From design to automation
 International SAMPE Symposium and Exhibition (Proceedings), v 47 I, 2002, p 454-465
2001
107. Roopesh Mathur, Bruce Fink and Suresh G. Advani, �Use of Genetic Algorithms for Injection Gate Selection in Resin Transfer Molding,�Proceedings of the American Society for Composites Sixteenth Technical Conference, September 9-12 2001

106. Jeffrey M. Lawrence and Suresh G. Advani , �Use Of Sensors And Actuators To Address Flow Disturbances During The Resin Transfer Molding Process,� Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition November 11�16, 2001, New York, NY

105. Jeffrey M. Lawrence, Kuang-Ting Hsiao, Roderic C. Don and Suresh G. Advani, �Use Of A Design And Control Methodology To Manufacture Complex Composite Parts By Manipulating Flow During Resin Transfer Molding Process,� Proceedings of the Society for the Advancement of the Material and Process Engineering (SAMPE),  (2001), Pages 286-299.

104. Pavel Simacek, Christof Ledermann, Suresh G. Advani "Fast Three Dimensional Numerical Simulation of Isothermal Mold Filling for Liquid Composite Molding Processes," , Proceedings of the American Society for Composites Sixteenth Technical Conference, September 9-12 2001

103. A. Gokce, K-T. Hsiao and S. G. Advani, "A method to find optimal auxiliary injection gate locations for successful mold filling in Resin Transfer Molding process", Proceedings of the Society for the Advancement of the  Material and Process Engineering (SAMPE), Volume 46 I, Pages 310-325 (2001).

102. "The Role of Compaction and Saturation in Flow During VARTM," Jeffrey A. Acheson, Pavel Simacek, and Suresh G. Advani, Proceedings of the American Society for Composites Sixteenth Technical Conference, September 9-12 2001

101. V. Antonucci, M. Giordano, K.-T. Hsiao, S.  G. Advani, �A Model for Cure Control During the Resin Transfer Molding Process,� Proceeding of the American Society for Composites, 16th Technical Conference, Blacksburg, Virginia, September 9-12, 2001.

100. J. M. Lawrence, K.-T. Hsiao, R. C. Don and S. G. Advani, �Use of a Design and Control Methodology to Manufacture Complex Composite Parts by Manipulating Flow during Resin Transfer Molding Process,� Proceedings of 46th SAMPE International Symposium and Exhibitions, Vol. 46, pp. 286-299, 2001.

99. A. Gokce, K.-T. Hsiao, and S. G. Advani, �A method to find auxiliary injection gate locations for successful mold filling in Resin Transfer Molding Process,� Proceedings of 46th SAMPE International Symposium and Exhibitions, Vol. 46, pp. 310-325, 2001.

2000
98. Ali Gokce and Suresh G. Advani, "Characterization of Controllability of Flow in Resin Transfer Molding Process", Proceedings of the ASME 2000 National Heat Transfer Conference, , pp 179, T9-35, ( 2000).

97. Kueh, S. R. M., Parnas, R. S. and Advani, S. G., "Strategic Placement of Discrete Flow Sensors for Liquid Composite Molding", Proceedings of the Advanced Materials and Processing Conferences, Dearborn, Michigan, September (2000) p69-79.

96. Lawrence, J. M., Sozer, E. M., Stadtfeld, H., Simacek, P., Estrada, G., Don, R., and Advani, S. G., "Use of Sensors and Simulations for Process Control to Manufacture a Feature Based Composite with Resin Transfer Molding Process,",  Proceedings of the Society for the Advancement of the Material and Process Engineering (SAMPE), pp. 146-155 (2000).

95. Sozer, E. M., Bickerton, S., and Advani, S. G., "Use of sensors and simulations for strategic control of liquid composite mold filling process", SME Technical Papers, EM00-103, (2000).

94. H.C. Stadfeld, M.L.Erninger, P. Simacek, S.G. Advani and S. Bickerton, "Continuous Permeability Measurement of Compacted Fiber Preforms and Their Influence in Mold Filling Simulations," Proceedings of the American Society for Composites, 15, pp.288-303 (2000)

93. J.M. Lawrence and S.G. Advani; The Effect Of Ply Drop-Off Regions On Flow Propagation And Processing Parameters During The Resin Transfer Molding Process; Proceedings of the 45th. International SAMPE 2000 Symposium and Exhibition, 45(1); pages 746-759 (2000)

92. Stadtfeld, Hubert C.; Sozer, E. Murat; Steiner, Karl V.; Advani, Suresh G.; Kolavennu, Soumitri; Parthasarathy, Sanjay; �Approach Towards An Automated Design Environment For The Resin Transfer Molding Process� Proceedings of SAMPE Symposium and Exhibition, v45 (II) p 1576-1583 (2000).

91. J. M. Lawrence, E. M. Sozer, H. C. Stadtfeld. P. Simacek, G. Estrada and S. G. Advani; �Flow Issues During the Manufaturing of a Feature Based Composite with the Resin Transfer Molding Process�; Proceedings of SAMPE-ACCE-DOE-SPE Midwest Advanced Materials and Processing Conference, p363-373 (2000).

90. Kueh, S. R. M., Dunkers, J. P., Advani, S. G., Parnas, R. S., Furrows, P. S., Jones, M. E., and Bailey, T. A.; "Long Period Gratings as Flow Sensors for Liquid Composite Molding"; Proceedings of SPIE's 5th International Symposium on Nondestructive and Health Monitoring of Aging of Infrastructure, Vol. 3993, pp. 45-51 (2000).

1999
89. Pavel B. Nedanov and Suresh G. Advani, Shawn W. Walsh and William O Ballata, �Determination of the Permeability Tensor of Fibrous Reinforcements for VARTM� ASME, 1999

88. K-T. Hsiao and S.G. Advani, "Investigation of Heat Transfer During Laminar Flow of Incompressible Liquid Through Periodic Porous Media", Submitted for Fifteenth National Heat and Mass Transfer Conference and Fourth ISHMT/ASME Heat and Mass Transfer Conference, January 5-8, 2000

87. B.K. Fink, R. Mathur and S.G. Advani, "An Evanescent Wave Fluorescence Fiber Optic Flow Sensor for Resin Transfer Molding", Army Research Laboratory Report, Aberdeen Proving Ground, MD 21005-5069.

86. S. Bickerton, E. M. Sozer, and S. G. Advani, "Use of Sensors and Simulations to Move Towards Automation of the RTM Process", Proceedings of the 12th International Conference on Composite Materials, July 1999.

85. E. M. Sozer, S. Bickerton, and S. G. Advani, "Modeling and Control of the LCM Processes", Proceeedings of the  5th International Conference on Flow Processes in Composite Materials, July 1999.

84. E. M. Sozer, B. Chen, P. J. Graham, T. W. Chou and S. G. Advani, �Characterizaton and Prediction of Compaction Force and Preform Permeability of Woven fabrics during the Resin Transfer Molding Process, Proceedings of  5th International Conference on Flow Processes in Composite Materials, (pp. 25-36)  July 1999

83. Hubert C. Stadtfeld, Simon Bickerton,  Karl V. Steiner and Suresh G. Advani, "Multi-line Injection System for On-line Pressure or Flow Rate Control of the Resin Transfer Molding Process", Proceedings of the 44th. International SAMPE Symposium and Exhibition, Long Beach California, p 677-687. May 1999.

82. M. Indermaur, H. C. Stadtfeld, S. Bickerton, K. V. Steiner, and S. G. Advani, "Integration of Sensors, Actuators and On-line Control for the RTM process", Proceedings of PPS-15 conference (1999).

81. S. Kueh, S. G. Advani and R. S. Parnas, �Fiber Optic Sensors for Resin Transfer Molding Process,� Proceedings of the 12th International Conference on Composite Materials, July 1999.

1998
80. S. Parthasarathy, S. Bickerton, S. C. Mantell, K. A. Stelson and S. G. Advani, "Real-Time Sensing and Control of Resin Flow in Liquid Injection Molding Processes" Proceedings of the American Control Conference, June 1998.

79. J. Slade and S. G. Advani, "Characterization of the Sink Term in Woven and Stitched Preform Impregnation", Proceedings of American Society for Composites 13th Annual Technical Conference, Baltimore, MD, September 1998, pp. 284-293.

78. W. Ballata, S. Walsh and S. G. Advani, "Determination of the Transverse Permeability of a Fiber Preform", Proceedings of American Society for Composites 13th Annual Technical Conference, Baltimore, MD, September 1998, pp. 256-270.

77. S. Bickerton, H. Stadtfeld, K. V. Steiner and S. G. Advani, "Active Control of Resin Injection for the Resin Transfer Molding Process", Proceedings of American Society for Composites 13th Annual Technical Conference, Baltimore, MD, September 1998, pp. 232-245.

76. Suresh G. Advani, Kuang-Ting Hsiao, and Hans Laudorn, "Heat Dispersion during Resin Transfer Molding Process", Proceedings of the 8th Japan-US Conference on Composite Materials, pp. 87-104, (1998);

75.. Mathur, R., Advani, S. G., Fink, B. K., "Optimization of Channel Design in VARTM Processing", Proceedings of the 56th Annual Technical Conference, Society of Plastics Engineers, pp. 2336-2340 (1998).

74. Mathur, R., Advani, S. G., Fink, B. K., "Optimal Location of Gates and Vents for Resin Infusion Processes Using Genetic Algorithms", Proceedings of the 1998 American Control Conference, pp. 2336-2340 (1998).

73. Mathur, Roopesh, Advani, Suresh G., Fink Bruce K. "Optimization of Channel Design in VARTM Processing", SPE Tech. Pap. 525, pp. 2336-2340, (1998).

72. Simacek, Pavel, Sozer, E. Murat and Advani Suresh G., "Numerical simulations of mold filling for design and control of RTM process", SPE Tech. Pap. 703, pp. 2327-2335, (1998)

71. E. M. Sozer, P. Simacek, and S. G. Advani, "Draping and filling of long axisymmetric molds in RTM process", Proceedings of the Eighth Japan-U.S. Conference on Composite Materials, pp. 73-84, (1998).

70. P. Simacek, E. M. Sozer, and S. G. Advani, "Numerical simulations of mold filling for design and control of RTM process", Proceedings of the Annual Meeting of the Society of Plastics Engineers: ANTEC, Atlanta, GA, pp. 2327-2335, (1998).

1997
69. Kuang-Ting Hsiao and Suresh G. Advani, "Heat Transfer in porous media", ASME Proceedings of the 32nd National Heat Transfer Conference, Vol. 349, pp. 177-188; September 1997, Baltimore, MD.

68. Martin Indermaur, Hubert C. Stadtfeld, Simon Bickerton, Karl V. Steiner and Suresh G. Advani, "Integration of Sensors, Actuators and On-line Control for Resin Transfer Molding Process".  PPS 15 conference Proceedings, Netherlands, 1997.

67. S. Bickerton, P. Simacek, K.M. Pillai, J. Mogavero and S. G. Advani, "Some Mold Filling Issues in Liquid Composite Molding Processes: Modeling and Experiments", Proceedings of the Annual Meeting of the Society of Plastics Engineers: ANTEC, April 1997.

66. R. Mohan, S. Bickerton, and S. G. Advani, "Analysis and Characterization of Flow Channel Effects During Manufacturing of Composites by Resin Transfer Molding" Proceedings of the Annual Meeting of the Society of Plastics Engineers: ANTEC, April 1997.

65. M.G. Joshi, M.H. Santare, S.G. Advani and F. Miller, "Analysis for Design of a Composite Hip Prosthesis," ASME BED, 36, pp. 299-300 (1997).

64. Mathur, R., Advani, S. G., Fink, B. K., Parnas, R. S., "An Evanescent Wave Fluorescent Fiber Optic Sensor for Resin Transfer Molding", Proceedings of the 29th International SAMPE Technical Conference, pp. 42-52, (1997).

63. Creasy, Terry and S. G. Advani, �Elongational Flow of Long Discontinuous Fiber Composites, FED Vol. 243, pp. 171-177, (1997).

62. Simacek, Pavel and S. G. Advani, �Approximate Temperature Solution During Non-Isothermal Viscous Resin Impregnation in a Stationary Bed of Fibers,� ASME HTD  Vol. 44, pp. 98-105 (1997).

61. Tim Hsiao and S. G. Advani, � Heat Transfer in Periodic Porous Media,� ASME HTD, Vol. 44, pp. 45-56(1997).

60. Benard, Andre and S. G. Advani, �Simulation of Microstructure Development During the Solidification of Semi-Crystalline Polymers,� ASME, HTD Vol. 44, pp. 21-39(1997).

59. Gillio, Emanuele F.; Gillespie, John W. Jr.; Eduljee, Rushad F.; Advani, Suresh G.; Bernetich, Karl R.; Fink, Bruce K., �Manufacturing Of Composites With The Co-Injection Process,� Proceedings of the 1997 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Part 2 (of 4) Apr 7-10 1997 v 2 1997 Kissimmee, FL, USA 4 AIAA, New York NY USA p 1009-1012

58. Mohan, R. V.; Bickerton, S.; Shires, D. R.; Advani, S.G.; Tamma, K.K,� Analysis And Characterization Of Flow Channels During Manufacturing Of Composites By Resin Transfer Molding,� Materials Proceedings of the 55th Annual Technical Conference, ANTEC. Part 2 (of 3) Apr 27-May 2 1997 Toronto, Canada, Society of Plastics Engineers Brookfield CT USA p 2388-2400 (1997).

57. Bickerton, Simon; Simacek, Pavel; Pillai, Krishna M.; Mogavero, Jeffrey; Advani, Suresh G., �Important Mold Filling Issues In Liquid Composite Molding Processes: Modeling And Experiments,� Materials Proceedings of the 55th Annual Technical Conference, ANTEC. Part 2 (of 3) Apr 27-May 2 1997 Toronto, Canada, Society of Plastics Engineers Brookfield CT USA p 2411-2423 (1997).

56. Gallez, Xavier E. and Advani, Suresh G.,� Resin Infusion Process Simulation (RIPS): A Fast Method For Three Dimensional Geometries,� Materials Proceedings of the 55th Annual Technical Conference, ANTEC. Part 2 (of 3) Apr 27-May 2 1997 Toronto, Canada, Society of Plastics Engineers Brookfield CT USA p 2454-2458 (1997).

1996
55. Xavier Gallez and Suresh G. Advani, "Advanced Simulations for Resin Transfer Molding," Proceedings of the Flow Processes in Composites Manufacturing (1996)

54. Jeff Mogavero and Advani, S. G., "Permeability: A Key to Successful Modeling of the RTM process, Proceedings of International SAMPE Symposium and Exhibition: 41-BK2, pp.1503 (1996).

53. Simacek, P.; Advani, S.G., �RTM Modeling - The Preforming Stage� Proceedings of the 1996 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Part 3 (of 4) Apr 15-17 1996 v 3 1996 Salt Lake City, UT, USA, AIAA New York NY USA p 1818-1827

52. Bickerton, Simon; Simacek, Pavel; Advani, Suresh G.; Guglielmi, Sarah E., �Investigation Of Draping And Its Effects On The Mold Filling Process During Manufacturing Of A Compound Curved Composite Part,� ASME MD Vol. 47, p. 47, New York, (1996).

51. Krishna Pillai and S. G. Advani, " Void Formation and Migration in Resin Transfer Molding, " ASME AMD Vol. 218, pp. 213-222, New York (1996).

50. Terry Creasy and S. G. Advani, "Extensional Flow of a model Long-Discontinuous Fiber filled Thermoplastic Melt," ASME AMD Vol. 217, pp.  195-206,  New York (1996)

49. Terry Creasy and S. G. Advani, " Rheology of Collimated Fiber Composites," ASME AMD Vol. 198, pp. 312-322, New York (1995)

1995
48. Steve Shuler and Suresh G. Advani, "Anisotropy Issues in Sheet Forming of Thermoplastic Fiber Reinforced Laminates," Proceedings of the 11th Annual ESD Advanced Composites Conference and Exposition, pp. 467-490 (1995).

47. Simon Bickerton, Lihwa Fong, Kurt Fickie and Suresh G. Advani  "Effect of Draping of Fiber Preforms on Process Parameters During Manufacturing with Resin Transfer Molding," Proceedings of the 11th Annual ESD Advanced Composites Conference and Exposition, pp. 213-220 (1995).

46. Simon Bickerton, Yves Parseval, Kurt Fickie and Suresh G. Advani, "Role of Local Permeability Variations in Resin Transfer Molding. Proceedings of the Ninth International Conference on Numerical Methods in Thermal Problems, Part 2, pp. 1335-1347(1995).

45. Lihwa Fong, Baichen Liu and Suresh G. Advani, " Modeling and Simulation of Resin Transfer Molding with Flexible Mold Walls," Proceedings of the Society of Plastic Industry, Session 3A p1-5 (1995).

44. S. Bickerton and S. G. Advani, "Characterization of Corner and Edge Permeabilities During Mold Filling in Resin Transfer Molding," Recent Advances in Composite Materials, MD-Vol. 56, pp143-151, (1995).

43. A. Benard and S. G. Advani, "Linking Microscopic and Macroscopic Effects during Solidification of Semi-crystalline polymers," Simulation of Materials Processing: Theory, Methods and Applications, Shen & Dawson (Eds.), pp231-235, 1995.

42. Ranganathan-Sridhar. Phelan-Frederick-R-Jr. Advani-Suresh-G, Microstructure-permeability predictions for the processing of advanced composites, SPE Tech. Pap. 41, pp. 3035-3039, (1995)

41. de-Parseval-Yves, Valery-Roy-R., Advani-Suresh-G, "Effect of local variations of preform permeability on the average permeability during resin transfer molding of composites" SPE Tech. Pap., 41, pp.3040-3044 , (1995).

1994
40. Ranganathan, S., G. M. Wise, F. R. Phelan, Jr., R. S. Parnas and S. G. Advani, "A Numerical and Experimental Study of the Permeability of Fiber Preforms," Proceedings of the Tenth ASM/ESD Advanced Composites Conference, 309, 1994

39. K. Pillai and S. G. Advani, "The Role of Dual Permeability of Fiber Preforms in Resin Transfer Molding" Proceedings of the 9th American Society for Composites, p. 17 (1994).

38. Lihwa Fong and S.G. Advani, "The Role of Drapability of Fiber Preforms in Resin Transfer Molding", Proceedings of the 9th American Society for Composites. 1246. (1994).

37. Benard, A. and Advani, S.G. �Modeling of the Spherulitic Growth in Polymers,'' American Chemical Society, Polymer Science and Engineering Division, Washington, D.C, August, 1994.

36. W. Zhang and S. G. Advani, "Heat Dispersion Effects in Stationary Fiber Beds," ASME AMD Vol. 194, pp. 335-352, New York (1994)

35. R. Varma and S. G. Advani, "Three-Dimensional Simulations of Filling in Resin Transfer Molding," ASME FED Vol. 200, pp.21-27, New York (1994).

34. K. Burget and S. G. Advani, "An Experimental Investigation of Fiber-Wall Interactions in Simple Shear Flow, ASME FED Vol. 189, pp. 59-70, New York (1994).

33. L. Fong and S. G. Advani, "The role of Dual Permeability in Mold Filling Simulation of Resin Transfer Molding," Proceedings of the International Conference on Composites Engineering, p. 301 (1994).

32. B. Liu, S. Bickerton and S. G. Advani, "Modeling and Simulation of RTM - Venting and Void Formation," Proceedings of the International Conference on Composites Engineering, p. 17 (1994)

31. P. Hepola, R.B. Pipes and S. G. Advani, "A Model for Thermoplastic Pultrusion," SPI Proceedings, pp. 236-247(1994).

1993
30. P. Hepola, R.B. Pipes and S. G. Advani, "A Model for Thermoplastic Pultrusion," SAMPE Proceedings, 25,pp 736-747(1993).

29. K. M. Pillai, T. L. Luce, M. V. Bruschke, R. S. Parnas and S. G. Advani, "Modeling the Heterogeneities present in Preforms during Mold-Filling in RTM", SAMPE Proceedings , 25,pp 279-293 (1993).

28. S. Ranganathan, M. A. Lamontia and S. G. Advani, "Consolidation and Void Reduction Model for In-situ Thermoplastic Composites Processing," SAMPE Proceedings , 25, pp. 630-641(1993).

27. M. V. Bruschke and S.G. Advani, "RTM Simulation: Non-Isothermal Flow and Cure Kinetics for Complex 3-D Shell-Like Structures," SPE Tech. Pap., 39, pp.  834-840, (1993).

26. A. Benard and S. G. Advani, "Non-Isothermal Crystallization of Polymers: Regimes of coupling," SPE Tech. Pap., 39 ,pp. 3016-3020, (1993).

1992
25. M. V. Bruschke, T. Luce and S. G. Advani, "Effective In-Plane Permeability of Multi-Layered RTM Preforms," Proceedings of the American Society of Composites, pp.103-112, (1992).

24. T. Sadiq, R. Parnas and S.G. Advani, "Experimental Investigation of Flow in Resin Transfer Molding," SAMPE  Proceedings , 24, pp.660-674 (1992).

23. A. Arefmanesh and S. G. Advani, "Non-isothermal Bubble Growth in Polymeric Foams" Cellular Polymers, ASME MD Vol. 38, pp. 25-40, New York (1992).

22. C. Y. Chan, A. N. Beris and S. G. Advani, "3-D Simulation of Fiber-Fluid Interactions During Composite Manufacturing Using the Galerkin Boundary Element Method," Computer Aided Design in Composite Material Technology III. . pp. 385-404 ,Eds. Advani S. G., W. R. Blain, W. P. de Wilde, J. W. Gillespie Jr., O. H. Griffin, Jr., Elsevier Applied Science Publishers, New York (1992).

21. S. RoyChowdhury, J. W. Gillespie Jr., and S. G. Advani, "Void Formation and Growth in Thermoplastic Processing" Computer Aided Design in Composite Material Technology III. . pp. 89-108 ,Eds. Advani S. G., W. R. Blain, W. P. de Wilde, J. W. Gillespie Jr., O. H. Griffin, Jr., Elsevier Applied Science Publishers, New York (1992).

1991
20.. M. Erhun and S. G. Advani, "Heat Transfer Effects During Solidification of Semi-Crystalline Materials," Heat and Mass Transfer in Solidification Processing, ASME HTD Vol. 175,  pp. 147-156 (1991).

19. S. RoyChowdhury and S. G. Advani, " Characterization of Consolidation in Thermoplastic Composites," Proceedings of Structures, Structural Dynamics and Materials Conference, (1991)

18. S. G. Advani, "On Characterizing and Modeling Effective Flow Properties of Fibers Suspended in a Resin System," SPI Tech. Pap., 46, Section 15A (1991).

17. M. Bruschke and S. G. Advani, "RTM: Filling of Complex Three Dimensional Shell like Structures," SPI Tech. Pap., 46, Section 20D (1991).

16. Mehmet Erhun and S. G. Advani, "A New Approach to Model Heat Flow during Crystallization," Polymers' 91, p. 27 (1991).

1990
15. A. Arefmanesh and S. G. Advani, "Modeling of Bubble Growth in Viscoelastic Foams" Processing of Polymers and Polymeric Composites, ASME Trans., MD-Vol. 19, pp. 185-212 (1990).

14. C. Y. Chan, A. N. Beris and S. G. Advani, "Simulation of 3-D Hydrodynamic Interactions around Ellipsoidal Particles using Higher Order Boundary Element Techniques," Computational Engineering with Boundary Elements, Vol. 1: Fluid and Potential Problems, pp. 231-252, Eds. S. Grilli, C. A. Brebbia and A. H. D. Cheng, Computational Mechanics Pub., Boston (1990).

13. M. Erhun and S. G. Advani, "Use of BEM to Model Heat Flow during Crystallization of Polymers," Computational Engineering with Boundary Elements, Vol. 1: Fluid and Potential Problems, pp. 263-276 ,Eds. S. Grilli, C. A. Brebbia and A. H. D. Cheng, Computational Mechanics Pub., Boston (1990).

12. M. Bruschke and S. G. Advani, "Mold Filling of Generalized Newtonian Fluids in Anisotropic Porous Media," Transport Phenomena in Material Processing, ASME Trans. HTD Vol. 132, pp. 149-158 (1990).

11. C. Plazaola, A. Ruebin and S. G. Advani, "Flow Analysis in a Miniature Extrusion Die for IC Assembly," SPE Tech. Pap., 36, p. 426 (1990).

1989
10.. A. Arefmanesh, S. G. Advani, and E. E. Michaelides, "A Parametric Study of Bubble Growth in Low Pressure Foam Molding " Mechanics of Plastics and Plastic Composites, ASME Trans., AMD-Vol. 104, pp. 341-355 (1989).

9. M. Bruschke and S. G. Advani, "A Finite Element/Control Volume Approach to Mold Filling in Anisotropic Media," Mechanics of Plastics and Plastic Composites, ASME Trans., AMD-Vol. 104, pp. 291-304 (1989).

8. A. Arefmanesh, S. G. Advani, and E. E. Michaelides, "A Numerical Study of Bubble Growth in Structural Foam Molding," SPE Tech. Pap., 35, p. 883 (1989).

7. M. Erhun and S. G. Advani, "A Numerical Study of Heat Flow During Crystallization," Transport Phenomena in Manufacturing, ASME Trans. FED Vol. 90,pp. 53-62 (1989).

6. M. Bruschke and S.G. Advani, "Flow Analysis in Resin Transfer Molding: Experiments and Predictions,", SPE Tech. Pap., 35, p. 1769 (1989).

1988-84
5. Advani, S. G. and C. L. Tucker III, " A Numerical Simulation to Predict Fiber Orientation in Thin Compression Moldings," SPE Tech. Pap. , 34, p. 687 (1988).

4. Advani, S. G. and C. L. Tucker, "Processing and  Structure of Short Fiber Composites,"  Manufacturing Processes, Machines and Systems, 14,  p. 441 (1987).

3. Tucker, C. L., T. A. Osswald and S. G. Advani, "Processing- Structure Predictions for Short Fiber Composites,"  Manufacturing Processes, Machines and Systems, 13,  p. 99 (1986).

2.. Advani, S. G. and C. L. Tucker III, " A Tensor Description of Fiber Orientation in Short Fiber Composites," SPE Tech. Pap. , 31,  p. 1113, (1985).

1. Advani, S. G. and D. F. Dolan, "ROBOTEYE- An Educational Vision Based Robotics System,"  Robots 8,  (1984).